   admin@shunlisteel.cn        +86 13905190622 
Home » News » Industry knowledge » what is the tie rod connected to

what is the tie rod connected to

Views:0    

The tie rod is a kind of structure which is used to pre tighten the rotor.  many building structures or materials will be built into tie rod type.


tie rod

Here is the content list:

what is the tie rod connected to?

Matters needing attention when connecting the tie rod.

How to adjust the connection between the tie rod and clutch?


what is the tie rod connected to?

Steps of connecting the tie rod as an accessory,Install the cables first. Before installing the steel cable, please make sure whether there is any defect at the end of the steel cable, as long as there is a defect, it is easy to break, so as long as you find a problem, please replace it with a new one immediately.

The installation procedure is opposite to that of removal. The steel cable should be installed at the beginning. If the tension tie rod is installed before the steel cable is installed, the installation process will become more complicated.


Matters needing attention when connecting the tie rod.

First of all, lock the set screw completely, because the screw is very small, so please do not use too much force when locking. When the staff locked the screw of this size, it took about three fingers to lock it.

At this time, first confirm whether the clutch tie rod moves smoothly. If there is no problem, install the lock nut. Finally, hold the clutch tie rod to have a look and confirm the action condition of the tie rod.


How to adjust the connection between the tie rod and clutch?

To adjust the clutch clearance, the most important thing is to really lock the screw used to adjust the tightness. If it is not tightened, the reaction of the clutch rod will appear in the process.

It is easier to replace the oil pressure type tie rod. Because there is no steel cable, it is easier to replace the oil pressure type tie rod. However, during installation, the position of the long cylinder and the concave hole must be aligned just like that of the brake master cylinder.

Put the protruding place into the concave hole of the tie rod. If it cannot be put in, there is no way to install the clutch tie rod normally. Replacing the pull rod is a very simple maintenance work, but if you don't know how to deal with the accident, there is no way to move the car.

In order to be on the safe side, learn how to replace the tie rod will never lose. Because the tie rod is an important part related to safety, it is recommended that you go to Jiangsu Shunli iron and Steel Group to consult professionals for replacement.


CONTACT US TODAY!

Related Products

Contact with us

Shunli Steel Group
Tel. : 0086 -25 - 84722733
Fax: 0086 - 25 - 84730966
Hand phone: +86 13905190622
001 9023936528(Canada & USA)

QQ: 477798703
E-mail: admin@shunlisteel.cn ; 
Skype: joannaxh-xh

Get in touch

CONTACT US TODAY!
Copyright 2015 Shunli Cold-formed Steel Industrial Co., Ltd. All rights reserved sheet piling prices