English
magyar
Filipino
Nederlands
Italiano
Deutsch
Português
Español
Pусский
Français
العربية
简体中文

Home » News » Industry knowledge » What is a SSAW Pipe Pile

What is a SSAW Pipe Pile

Publish Time: 2021-08-04     Origin: Site

Spiral submerged arc welded steel pipe is a kind of metal pipe with spiral seam welded by submerged arc welding technology.SSAW pipe is made of hot rolled coiled steel by automatic submerged arc weld under normal atmospheric temperature. These pipes mainly used in petroleum and natural gas industry to transport flammable and non-flammable liquid and steel construction.



Mainly usage:

Spiral welded steel pipes are widely used in Oil, Natural Gas, Water and other flammable & nonflammable liquid conveyance and distribution pipelines, steel structures for construction and other general purposes by means of their wide size range.


Manufacturing Process of Spiral Submerged-arc Welded steel pipe

(1) Raw materials that strip, wire, flux. Must go through rigorous testing before being put into the physical and chemical.

(2) Strip head and tail docking, using single or double wire submerged arc welding, in rolled steel by automatic submerged arc welding.

(3) Before molding, the strip after flattening, cutting, trimming, planing, surface cleaning and transportation to the curved edge treatment.

(4) The use of electrical contacts on both sides of the conveyor control the pressure cylinder pressure to ensure the smooth delivery of the strip.

(5) The use of internal or external control roll forming.

(6) The weld gap control device to ensure that the weld gap to meet the welding requirements, diameter, volume and the wrong side of the weld gap have been strictly controlled.

(7) The welding and soldering are used outside the United States Lincoln welding machine for single or double wire submerged arc welding, to obtain stable welding specifications.

(8) After welding the weld line continuous ultrasonic injury checked to ensure 100% coverage of non-destructive testing of spiral weld. If defective, automatic alarm and spraying tags, production workers so adjusting the process parameters, and remove defects.

(9) The use of air plasma cutting machine to cut a single tube.

(10) Cut into a single pipe, each batch of steel should be carried out strict inspection system, inspection of weld mechanical properties, chemical composition, fusion status, steel surface quality and after NDT inspection process to ensure that qualified pipe before they can formally put into production.

(11) There is a continuous sonic flaw marks the site of the weld, manual ultrasonic and X-ray review, if there are defects after repair again after destructive testing until confirmation defect has been eliminated.

(12) Steel butt weld and spiral weld intersects with D-type connector where the pipe all through the X-ray television or film examination.

(13) Each pipe hydrostatic test pressure radial seal. Test pressure steel pipe pressure and time by computer testing device strictly controlled. Test parameters are automatically printed record.

(14) Pipe end machining, so that the end vertical, blunt edge bevel and accurate control.


CONTACT US TODAY!

Contact with us

Shunli Steel Group
Tel: 0086 -25 - 84722733
Fax: 0086 - 25 - 84730966
Hand phone: 0086 -13739192886;
001-9023936528(Canada & USA)

QQ: 236979001
E-mail: admin@shunlisteel.cn

Get in touch

CONTACT US TODAY!

Sheet piling for sale     About Us      Products       Technical Libirary       Certificates      Facilities       Contact Us
Copyright 2015 Shunli Cold-formed Steel Industrial Co., Ltd. All rights reserved  sheet piling prices