   admin@shunlisteel.cn        +86 13905190622 
Home » News » Industry knowledge » Hot rolled sheet piling PU7|PU9|PU11|PU16|PU20

Hot rolled sheet piling PU7|PU9|PU11|PU16|PU20

Views:89    

hot rolled sheets and pu7 pu9 pu11 great power, using the potential, it is possible that instead of being less effective methods, such as the hands and clamshells kutatni. sh dpall "pu16 hydrostatic pressure and the pore water pu20 model is defined by the hydrostatic pressure, a point is proportional to its depth below the water szinten.ez allow free movement " change the unit mass of water, if necessary.


It is important to pay attention to a major difference in the process of hot rolling and cold rolling. The heat of the heat is treated with the heat of the heat. The process of cold rolling is carried out at the temperature near the normal temperature. These technologies have an impact on the overall applicability and performance, but they cannot be confused with the formal specifications and grades of steel sheet piles. They are about the composition and performance evaluation of metallurgy. Heat rolling of steel of different grades and specifications, or two basic carbon steel sheet piling prices, including alloy steel, and other rolls.


Sectio Dimensio Ma Moment of inertia Modulus of sectio



Width Height Thickne Per pile Wall




h t





mm mm mm mm kg/m kg/m2 cm4/m cm3/m
PU 6 600 226 7.5 6.4 45.6 76 6780 600
PU 7 600 226 8.5 7.1 49.9 83.1 7570 670
PU 8 600 280 8.0 8.0 54.5 90.9 11620 830
PU 9 600 280 9.0 8.7 58.8 98.0 12830 915
PU 11 600 360 8.8 8.4 61.8 103.0 19760 1095
PU 16 600 380 12.0 9.0 74.7 124.0 30400 1600
PU 20 600 430 12.4 10.0 84.3 140.5 43000 2000
PU 25 600 452 14.2 10.0 93.6 156.0 56490 2500
L2S 500 340 12.3 9 69.7 139.4 27200 1600
L3S 500 400 14.1 10 78.9 157.8 40010 2000
L4S 500 440 15.5 10 86.2 172.0 55010 2500
L5S 500 450 20.6 11.5 106.0 212.0 72000 3200
JSP2 400 200 10.5 0 48 120.0 8740 874
JSP3 400 250 13.0 0 60.0 150.0 16800 1340
JSP4 400 170 15.5 0 76.1 190.0 38600 2270
GU12-500 500 340 9 8.5 56.6 113.2 19640 1155
GU13-500 500 340 10.0 9.0 60.8 121.7 21390 1260
GU15-500 500 340 12.0 10.0 69.3 138.6 24810 1460
PU6R 600 280 6.0 6.0 42.2 70.0 8940 640
PU7R 600 280 6.5 6.3 44.3 74.0 9580 685
PU8R 600 280 7.5 6.9 48.7 81.0 10830 775
PU9R 600 360 7.0 6.4 49.5 82.0 16930 940
PU10R 600 360 8.0 7.0 53.8 90.0 18960 1055
PU11R 600 360 9.0 7.6 58.1 97.0 20960 1165
PU13R 675 400 10.0 7.4 65.6 97.0 25690 1285
PU14R 675 400 11.0 8.0 70.5 104.0 28000 1400
PU15R 675 400 12.0 8.6 75.4 112.0 30290 1515


in the 7 - 9. high initial grand pu system is tieback 11 - 16 - 20 kutatni.ha pu7 farms with sales in addition to the internal pressure pu9 triangle  distribution mechanism is required, the user pu11 input pressure still look at each layer of the earth pressure on the steel sheet movement can be calculated on the basis of pu16 adopted traditional methods using any other rate of bm there is an active. water pu20 will work at the stage of individual sections of the composer.


CONTACT US TODAY!

Related Products

Contact with us

Shunli Steel Group
Tel. : 0086 -25 - 84722733
Fax: 0086 - 25 - 84730966
Hand phone: +86 13905190622
001 9023936528(Canada & USA)

QQ: 477798703
E-mail: admin@shunlisteel.cn ; 
Skype: joannaxh-xh

Get in touch

CONTACT US TODAY!
Copyright 2015 Shunli Cold-formed Steel Industrial Co., Ltd. All rights reserved sheet piling prices