For construction of any risk, we need to be very careful to ensure the normal operation of the whole project, so that we can not lose small details and take large steps into account. In order to ensure the safety of the process of steel sheet pile construction, we need to test it in the early stage of construction. How to test it? This requires us to grasp from two aspects. First, the appearance and the next material. Wuxi Heng Yong Construction Engineering Co., Ltd. will explain the early detection work of this steel sheet pile for you.
Steel sheet pile is a very useful tool, and the steel sheet piles we use may be partly used, which is also a big challenge for the quality of the project. So we need to see that all steel sheet piles are not going to be a problem.
First, check the surface defects of steel sheet pile, for some problems we should be part of the rust cleaning, the surface defect repair.
Second, the end cutting surface is corrected. If the end needs to be cut, the vertical rectangle is kept as far as possible. Polish it after cutting and use it.
Again, the bending correction. One problem in many steel sheet piles is the deformation and bending, and the use of professional bending tools. The steel plate piles are fixed on the support platform, and the bending part is required to be jacking to withstand the cold bending treatment.
Finally, the lock mouth should be fully corrected. The new standard sheet pile wall cost can be used as a template for locking correction. It can be handled slowly by hoist or manually by hot bake and tapping.
