The hot-rolling heating furnace clutch is a power-loss electromagnetic clutch that is combined with no electricity and runs at high speed. Through the understanding of the hot rolling furnace clutch, briefly describe the concept of the steel pipe pile clutch, the operation essentials and the treatment of abnormal problems.
Here is the content list:
Analyze the understanding of the clutch through examples
What are the advantages of Shunli cold rolled clutch?
Application of Clutch in Jiangsu Shunli Iron and Steel Group
The hot-rolling heating furnace clutch has a magnetic outer pole equipped with a coil and a magnetic inner pole tooth equipped with a spring.Then the inner pole plate and the shaft are clamped and fixed by a retaining ring. The magnetic outer pole and the positioning disk are riveted by pins. The positioning disk is connected with the bearing seat through a magnetic isolation pad. The bearing seat is inlaid with bearings, and the magnetic inner pole teeth and coupling teeth All have face teeth of the same size and number.
Our SL ZC9 hot-rolled clutch is always used as an accessory for pipe piles, with the purpose of connecting hot-rolled sheet piles from other suppliers. It can be perfectly connected with European hot rolled sheet piles. The weight of the clutch is approximately 9.3kg/m.In order to connect the sheet piles, the cold rolled clutch is always used as an accessory for the pipe piles. The thickness of the cold rolled clutch should consider the thickness of the sheet pile. Generally, we recommend that the thickness of the clutch should be the same as the thickness of the sheet pile so that they can match each other perfectly.
1. Cold-rolled separators are often used as accessories for pipe piles to connect sheet piles.
2. The thickness of the sheet pile should be considered when choosing the thickness of the cold rolled clutch. Generally, we recommend that the thickness of the clutch should be the same as the thickness of the sheet pile so that they can match each other perfectly.
Cold rolled clutch Hot rolled clutch Steel clutch
ISO14001, ISO9001, CE, CE-EN1090, FPC, cold forming level 1
Q235B, Q345B, S235, S240, SY295, S355, S430, S460, A690, ASTM A572 grade 50, ASTM A572 grade 60. All Chinese standards, EN standards, ASTM standards and other standard materials are available upon request.
Manufacturing inspection standards
EN10249-1 1 EN10249-2 for Z-shaped sheet piles
Products used in the construction of ports, shipyards, ports, bridges, cofferdams, etc.
Shunli Steel Group uses a cold-rolling mill's friction clutch sleeve seat to be installed on the top of the motor main shaft, the sprocket is oriented on the gear sleeve, friction plates are installed on both sides, and the inner hole is equipped with positioning rings.The clamping piece is installed on the outside of the sprocket, the end gland is installed on the outside of the clamping piece, and a pin is installed between the two. The end face nut is fixed on the end face gland and sleeved on the top of the column pin, and an elastic element is installed on the column pin.
The retaining ring is installed on the journal of the sleeve seat, and the elastic element is used to realize the elastic pre-tightening of the clutch of the cold rolling mill, which effectively eliminates the influence of the axial clearance caused by the wear of the sprocket and the friction plate on the pre-tightening force of the clutch. In addition, Shunli Steel Group has reached a strategic partnership with Bao steel to ensure the quality of raw materials. In terms of overall production, sales and exports, the global sales network has ensured that Shunli Steel Group ranks first in the Chinese sheet pile industry!