   admin@shunlisteel.cn        +86 13739192886 
Home » News » Industry knowledge » Z type cold formed sheet pile MSZ17-312 ,MSZ17-340,MSZ17-350,MSZ17-375

Z type cold formed sheet pile MSZ17-312 ,MSZ17-340,MSZ17-350,MSZ17-375

Views: 23    

Inquire

The middle light plate pile MSZ17-406 can be used to prevent erosion to protect the shore. When a person works or passes under a scaffold sheet pile manufacturers, a screen or a grid or a similar thing should be set between the toe plate and the top MSZ17-375 guide. For normal freshwater applications, the components are supplied in accordance with the provisions of galvanized steel or aluminum steel 2 trusses and gaskets. The Z type cold - formed sheet pile MSZ17-312 MSZ17-340 should be designed to support four times the rated MSZ17-350 load. At least, an impermeable hat should be placed on the surface of the slope, and a continuous roof / groove connected to the slope should be built at the toe of the slope / wall.


First to alert the steel sheet pile design and calculation, our factories can adjust process parameters depending on size and specifications, and calculate the total cost. In Asia, U-shaped steel sheet pile is still the most commonly used, is now the construction of the pier, deep foundations, seawalls, bulkheads are required ž size. Now, in Europe, especially Western Europe, steel sheet piling contractor like ž profile. HZ combined wall, OZ sheet piles and tubular composite wall in all Z-type products.


The installation of relatively light steel boxes can be completed by MSZ17-350 at the site and then hoisted to the position. Or, it can be assembled on the scene without the need for heavy equipment. The installation method, MSZ17-340 is different, and overcome the difficulties or restrictive installation conditions to the Contractor's skill and imagination open.Micro Zee 17 steel sheet pile shall not be less than MSZ17-375 and MSZ17-406 set inch plywood is equivalent to the United States Plywood Association BB, in group I, external or similar materials. Two supporting MSZ17-312 loader should be 2 "x 4" or 1 "X10" for coarse selection of wood or better.


SectioDimensioMaMoment of inertiaModulus of sectio



WidthHeightThicknePileWall


wht/




IIILbs/ftLbs/ft2In4/ftIn3/ft
MSZ10-31238.822.190.31249.7215.371.30.67
MSZ10-34038.822.190.34054.1016.721.410.72
MSZ10-35038.822.190.35055.6917.221.450.74
MSZ10-37538.822.190.37359.6718.451.560.79
MSZ10-40638.822.190.40664.6019.971.730.86
MSZ11-31238.553.530.31249.7215.486.833.76
MSZ11-34038.553.530.34054.116.847.434.06
MSZ11-35038.553.530.35055.6917.347.654.17
MSZ11-37538.553.530.37559.6718.588.214.44
MSZ11-40638.553.530.40664.620.118.924.79
MSZ12-31237.726.640.31249.728.7629.298.76
MSZ12-34037.726.640.34054.19.5031.879.50
MSZ12-35037.726.640.35055.699.7732.849.77
MSZ12-37537.726.640.37559.6710.4335.1710.43
MSZ12-40637.726.640.40664.611.2738.1611.27
MSZ13-31236.389.580.31249.7214.1367.8614.13
MSZ13-34036.389.580.34054.1015.3273.7915.32
MSZ13-35036.389.580.35055.6915.7475.9315.74
MSZ13-37536.389.580.37550.6716.8181.3416.81
MSZ13-40636.389.580.40664.618.1888.2718.18
MSZ14-31234.5612.240.31212.2719.62120.9719.62
MSZ14-34034.5612.240.34018.8921.29131.2821.29
MSZ14-35034.5612.240.35019.3421.91135.5021.91
MSZ14-37534.5612.240.37520.7223.38144.9323.38
MSZ14-40634.5612.240.40622.4325.29157.2525.29
MSZ15-31232.7914.110.31249.7218.20172.6624.24
MSZ15-34032.7914.110.34054.1019.80187.5226.27
MSZ15-35032.7914.110.35055.6920.38193.2627.06
MSZ15-37532.7914.110.37559.6721.84207.0328.91
MSZ15-40632.7914.110.40664.6023.64224.4631.27
MSZ16-31231.0515.540.31249.7219.22223.3628.45
MSZ16-34031.0515.540.34054.1020.91242.9830.88
MSZ16-35031.0515.540.35055.6921.53249.8531.74
MSZ16-37531.0515.540.37559.6723.06267.8733.95
MSZ16-40631.0515.540.40664.6024.97290.7436.75
MSZ17-31229.7116.430.31249.7220.09262.3431.60
MSZ17-34029.7116.430.34054.121.86285.1034.27
MSZ17-35029.7116.430.35055.6922.50293.3635.25
MSZ17-37529.7116.430.37559.6724.11314.5737.71
MSZ17-40629.7116.430.40664.6026.10241.0340.80
MSZ18-31228.3817.20.31249.7320.58296.0534.49
MSZ18-34028.3817.20.2454.122.39322.0937.45
MSZ18-35028.3817.20.35055.6923.04330.9538.46
MSZ18-37528.3817.20.37559.6724.69354.4941.12
MSZ18-40628.3817.20.40664.626.74384.8344.53
MSZ19-34026.8817.90.34054.123.61368.1841.17
MSZ19-35026.8817.90.35055.6924.30867.0442.24
MSZ19-37526.8817.90.37559.6726.04929.7445.25
MSZ19-40626.8817.90.40664.6028.191008.1548.97


News Center

CONTACT US TODAY!

Related Products

Contact with us

Shunli Steel Group
Tel: 0086 -25 - 84722733
Fax: 0086 - 25 - 84730966
Hand phone: 0086-13739192886;
001-9023936528(Canada & USA)

QQ: 236979001
E-mail: admin@shunlisteel.cn

Get in touch

CONTACT US TODAY!
Copyright 2015 Shunli Cold-formed Steel Industrial Co., Ltd. All rights reserved sheet piling prices