   admin@shunlisteel.cn        +86 13905190622 
Home » News

clutch

Knowing that you are interested in clutch, we have listed articles on similar topics on the website for your convenience. As a professional manufacturer, we hope that this news can help you. If you are interested in learning more about the product, please feel free to contact us.
  • [Industry knowledge] how to tell if you need a new clutch

    The clutch is an important part of the transmission. In fact, this is the first stage of the transmission.

  • [Industry knowledge] how to replace a clutch

    The replacement method of the clutch is to use the bracket raising device and use the trolley jack to remove the gearbox. It is strongly recommended to use a clutch alignment tool, otherwise you may spend a lot of time trying to align the clutch plate and input shaft spline.

  • [Industry knowledge] How to maintain the clutch

    The sleeve of the friction clutch of the cold rolling mill is installed on the top of the motor shaft, the sprocket is installed on the gear sleeve in a certain direction, the friction plates are installed on both sides, and the positioning ring is installed in an inner hole.

  • [Industry knowledge] how to install a clutch

    Through the clutch, a shaft is combined with the engine power, so that the power continues to be transmitted. In the clutch, there is an indispensable buffer device. It consists of two disks similar to a flywheel. A rectangular groove is punched on the disk. Springs are arranged in the grooves.

  • [Industry knowledge] how to drive clutch

    A clutch includes a driving rotating body connected with a driving source such as a motor, and a driven rotating body directly engaged with the driving rotating body. Two rotating bodies are received in the housing,

  • [Industry knowledge] how to break in a clutch

    A friction clutch of a cold rolling mill includes a sleeve seat, an end face gland, a clamping plate, a sprocket, a pin, a friction plate, a positioning ring, an end face nut, a retaining ring, and an elastic element. Through the example of the friction clutch of the cold rolling mill

  • [Industry knowledge] how to bleed a clutch

    In most cases, the clutch can use brake fluid as its working fluid. When the steel pipe pile clutch is used, there will be a mechanical clutch, which means that it is operated by a lever, pivot point and linkage system,

  • [Industry knowledge] how does a clutch work

    The concept of the clutch is an important part of the automobile power system. It is responsible for cutting off and connecting the power supply and the engine. In the steel sheet pile manufacturing process, the clutch is used to connect the plate shape of other suppliers

  • [Industry knowledge] how long does a clutch last

    Most clutches have a design life of approximately 60,000 miles before they need to be replaced. Some may need to replace 30,000 miles, while others can continue to travel more than 100,000 miles, but this is not common. So, how long can the clutch last when installing steel sheet piles?

  • [Industry knowledge] What does clutch mean?

    What does clutch mean?The hot-rolling heating furnace clutch is a power-loss electromagnetic clutch that is combined with no electricity and runs at high speed. Through the understanding of the hot rolling furnace clutch, briefly describe the concept of the steel pipe pile clutch, the operation esse

CONTACT US TODAY!

Contact with us

Shunli Steel Group
Tel. : 0086 -25 - 84722733
Fax: 0086 - 25 - 84730966
Hand phone: +86 13905190622
001 9023936528(Canada & USA)

QQ: 477798703
E-mail: admin@shunlisteel.cn ; 
Skype: joannaxh-xh

Get in touch

CONTACT US TODAY!
Copyright 2015 Shunli Cold-formed Steel Industrial Co., Ltd. All rights reserved sheet piling prices